1. Pre Applied Construction Method
It can be closely bonded with post-poured concrete.
2. Reliable Bonding Strength
The membrane can be bonded tightly to the substrate, if there is
local failure on the membrane, water would be confined in a limited
area without fluid-channeling, which makes it much easier to
repair.3. Low Requirements on the Substrate
MAC pre applied waterproofing can be applied on wet or uneven
substrate surface. No need of primer, not affected by the weather.
Especially during rainy season, the advantage is more prominent
when compared with hot-applied membrane.
4. Safe & Environment-friendly
During construction, there is no solvent or fuel involved. Avoiding
pollution, fire risks and saving resources as well.
5. Excellent Physical Properties
Excellent tensile resistance, puncture resistance, weather
resistance, strong ability to adapt to the base deformation and
other properties.
6. Best Cost Performance
It can be used to build an extraordinary "skin-type" firm
waterproof system together with the post-cast concrete structure
layer, with high reliability. It can also save the traditional
cement mortar screed layer and fine stone concrete protective
layer, saving a lot of costs & construction time.
※ Scope of Application
Mainly applicable for underground waterproof projects like basement
slab, subways, tunnels,
and other projects which have high standards for the waterproof effect, etc.
※ Brand Stature
Joaboa Tech is the main editor of China National Standard for Pre
Applied Waterproofing GB/T 23457-2017.
※ Construction Method
Bondsure® MAC HDPE Non-asphalt Macromolecule Pre Applied
Waterproofing Membrane uses Pre Applied application method, which
can be closely bonded with post-poured concrete.
※ Storage and Transport
1. Different types or specifications of products should be
separated, not mixed.
2. Keep it dry and ventilated, protected from the sun or rain.
3. Pile up the membranes flatwise whose stockpile height should not
exceed five layers.
4. Prevent tilt or side pressure during transportation, and cover
with felt if necessary.
5. Storage time is at least one year from manufacture date if the
product is under normal storage condition.
※ Market Share
Joaboa Tech, Inventor and Representative Brand of Chinese
Self-adhesive Waterproof Membrane, whose market share has ranked as Top 1 in Chinese domestic market for
over 10 years, widely used in Viet Nam, Cambodia, India, etc. as well.
※ Document Download
Joaboa Tech Bondsure® MAC HDPE Non-asphalt Macromolecule Pre
Applied Waterproofing Membrane
